Avlink YX-1042 User Manual download pdf (Page 10)

YX-1042 Matrix Switching System—User Manual

6.0 YX Matrix System Technical Parameters

Model

Technical Parameters

YX-1042

Video

Enhancement 0dB

Bandwidth 150MHz (-3dB), Full Load

Max. Transmission Delay 20nS(±1nS)

Switching Speed 40nS(Longest Time)

Signal Type Component/Composite Video

Video Input Connector 4 Set RCA Female Connectors

Video Input Impedance 75Ω

Video Output Connector 2 Set RCA Female Connectors

Video Output Impedance 75Ω

Audio

Signal Type Stereo, Balanced or Unbalanced, Digital Optical Audio

Audio Input Connectors

4 Set RCA Female Connectors

4 Digital Optical TOSlink

Audio Output Connectors

2 Set RCA Female Connectors

2 Digital Optical TOSlink

Specifications

Power Adaptor DC 12V / 600mA

Operating Temperature 0 ~+℃ 85℃

Housing Measurements 440(L)x185(W)x43mm(H)

Product Weight 2200g

Median Failure Interval 30,000 Hours

7.0 Common Problems and Solutions

1. What to do if the YX matrix front panel keys switching not responsive?

Answer: The YX matrix front panel keys employ scanning testing and require longer response

time. Press the keys for 2 seconds and then release. This way, key switching will be

responsive in operation.

2. What to do if matrix does not display or color display is abnormal after hot plug?

Answer: Switching of the matrix system goes through the IC chips. If the voltage difference

between the input signal equipment and the matrix equipment is too large, hot plug

could easily cause damage to the IC chips. Please turn off power to the system before

plugging or unplugging.

3. What to do if ghosting happens when YPbPr signals output to display?

1 2 ... 5 6 7 8 9 10 11

No comments

Avlink YX-1042 User Manual Page 10